Replacement Solenoid is Zinc Plated Steel with 1/8-inch NPT Inlet/Outlet
This solenoid can be used for drag racing, or for street applications. Solenoid can be used on the front or rear brakes of your vehicle and can handle pressures up to 1500 psi, or maintain constant pressure of up to 400 psi for a maximum of 60 seconds. This is the replacement solenoid only.
- Brake Holding Device for Doing Burnouts - Capable of holding 400psi pressure for up to 60 seconds
- Controls Front Or Rear Brakes
- Zinc Plated Steel with 1/8" NPT inlet/outlet fittings
- Dependable Solenoid (solenoid only) - for the full kit please order Item 46076
Information:
Works with B&M launch control 12 or 16-volt systems
Application Summary:
| Year |
Make/Model |
| Works |
with B/M launch control 12 or 16 volt systems |
| Attributes |
| ASIN |
B000CIIDR2 |
| Automotive Item Grade |
High Performance |
| Brand |
B&M, B&M |
| Bullet Point #1 |
Brake Holding Device |
| Bullet Point #2 |
Controls Front Or Rear Brakes |
| Bullet Point #3 |
Dependable solenoid |
| Bullet Point #4 |
Female inlets |
| California Proposition 65 |
Yes |
| Category |
Transmission and Drivetrain |
| Components |
Wire, Wire |
| Connector/Terminal Configuration |
Raw Wire, Raw Wire |
| Country of Origin (Primary) |
US |
| Electrical System Supported |
16 volt, 16 volt |
| Emission Code |
5, 5 |
| Finish |
Zinc Plated, Zinc plated steel |
| Harmonized Tariff Code (Schedule B) |
8505908000 |
| Hazardous Material Code |
N |
| Height (IN) |
2, 2 |
| Inlet Port Gender |
Female, Female |
| Inlet Port Quantity |
1 |
| Inlet Ports |
1, 1 |
| Inlet Size |
0.125 in. NPT |
| Inlet Thread Size |
1/8 in., 1/8 in. |
| Inlet Thread Type |
NPT, NPT |
| Item Height |
2.000 in. |
| Length |
4.000 in. |
| Length (IN) |
4 |
| Length (in.) |
4 |
| Life Cycle Status Code |
Available to Order |
| Long Description |
Brake Launch Control Solenoid |
| NAFTA Preference Criterion Code |
B |
| Outlet Port Gender |
Female, Female |
| Outlet Port Quantity |
1 |
| Outlet Ports |
1, 1 |
| Outlet Size |
0.125 in. |
| Outlet Thread |
1/8 in. |
| Outlet Thread Size |
1/8 in., 1/8 in. |
| Outlet Thread Type |
NPT, NPT |
| Part Type |
Automatic Transmission Shifter Solenoid |
| Product Type |
Brake Line Lock Kit, Brake Line Lock Kit |
| Sale Category |
Transmission and Drivetrain |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Short Description |
Launch Control |
| Standard Pack |
1 |
| Vehicle System Voltage |
12V, 12V |
| Voltage |
12 V |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
3 |
| Width |
2.000 in., 2 |
| Width (IN) |
2 |
| Width (in.) |
2 |
| GTIN |
00019695460754 |
